Outdoor optical patchcords

An Outdoor patchcord is used when laying outdoor fiber optic networks from the signal source to the final receiver. Patchcords are made on the basis of ADSS cable:

Cable brand
Maximum tension load, kN
Maximum span between supports, m*
Cable diameter, mm
ОКП(с0,5)Т
0,5
30,0
4,0
ОКП(с1,0)ЛТ
1,0
50,0
4,0
ОКП(с1,0)Т
1,0
70,0
4,5

* For the central regions of Ukraine

Types of connectors

SC/UPC

SC/APC

LC/UPC

FC/UPC

Patchcords are made in lengths of 25m, 50m, 75m, 100m, 125m, 150m, 175m, 200m, 250m, 300m, or other sizes on request.

Patchcords are crimped at both ends with connectors. For the convenience of working with the patchcord, the outermost 50-60cm of the cable on both sides are made in the format of a 3.0mm cable with an LSZH jacket.

We produce patchcords simplex construction with single mode fiber G.652.D standard.

Insertion loss classification of pluggable connectors (IEC 61755-1 (2005), rev. ITU-T L.36 (01/2008))

Pluggable connector type Insertion loss, dB
Class A *
Class B 0,12 – not more
0,25** – not more
Class C 0,25 – not more
0,50** – not more
*Undefined
**For no more than 3% of samples

Return loss classification for pluggable connectors (IEC 61755-1 (2005), rev. ITU-T L.36 (01/2008))

Pluggable connector type Return loss, dB
Class 1 60* – not less
55** – not less
Class 2 45 – not less
Class 3 35 – not less
*For connected
**For disconnected
Top