Optic cable А-DQ(ZN-GYSR)2Y xTyЕ 1,5kN
Construction number:
G15PxM
For laying on roofs, facades, poles and other open areas where there is significant exposure to ultraviolet radiation.
UV resistant
For direct installation in the ground, for external installation in trenches or using ground drilling rigs.
Direct burying
For laying in cable ducts or collectors. Also used for pulling into pipes.
Cable duct
For laying in soil, sewers, technical rooms and rural areas where rodents are found.
Rodent protection
For laying outdoors – on facades, poles, in the ground, outdoors.
Outdoor
А-DQ(ZN-GYSR)2Y xTyЕ 1,5kN is a multitube design of armored optical cable designed for laying in soils of 1-3 categories, in cable ducts and conduits. It is intended for use in distribution and trunk networks, for connecting apartment buildings, industrial and office buildings, and supports fiber counts from 6 to 144. The cable has a central FRP rod and a peripheral layer of glass roving as strength elements that provide resistance to stretching and deformation during installation. Rodent protection is provided by laminated corrugated steel tape, which also increases the overall strength of the cable in aggressive environments. Moisture protection is provided by a gel inside the tubes and a water-blocking tape between the tubes. Optionally, a special gel can be between the tubes to protect against moisture. The cable can withstand short-term tensile loads of up to 1.5 kN. The outer sheath is made of UV-stabilized HDPE
The family of cables
General information
Cable construction
- Central strength member: FRP rod
- FRP jacketing: Polyethylene (HDPE)
- Optical fiber: Single-mode Rec. ITU-T G.652.D
- Filler: Thixotropic filling compound (gel)
- Loose Tube: Polybutylene terephthalate (PBT)
- Dummy filler: Polyethylene (HDPE)
- Peripheral strength member: Water blocking glass yarn
- Water blocking element: Water blocking yarn
- Protective metal element: Steel tape
- Outer jacket: Polyethylene (HDPE), black, UV-resistance
Advanced features
The table scrolls sideways
| Cable ID | G15P6M | G15P8M | G15P9M | G15PBM | G15PGM | G15PHM | G15PEM | G15PKM | G15PNM | G15PRM | G15PTM | G15PXM |
| Number of optical fibers | 8 | 12 | 16 | 24 | 36 | 48 | 72 | 96 | 144 | |||
| Construction | 2х4 | 2х6 | 3х4 | 4х4 | 4х6 | 6х4 | 2х12 | 3х12 | 4х12 | 6х12 | 8х12 | 12х12 |
| Optical fiber
Default Fiber Standard |
Single-mode Rec. ITU-T G.652.D | |||||||||||
| Cladding Diameter (±0,7), µm | 125 | |||||||||||
| Cladding Diameter (±5), µm | 242 | |||||||||||
| Attenuation (λ= 1310 nm), dB/кm | ≤ 0,32 | |||||||||||
| Attenuation (λ= 1550 nm), dB/кm | ≤ 0,22 | |||||||||||
| Number of elements | 6 | 8 | 12 | |||||||||
| Number of fillers | 4 | 3 | 2 | 0 | 4 | 3 | 2 | 0 | ||||
| Cable diameter (±0,6), mm | 9,2 | 10,4 | 12 | |||||||||
| Cable weight (±5%), kg/km | 85 | 86 | 87 | 86 | 87 | 89 | 106 | 138 | ||||
| Max. Tension Installation , kN | 1,5 | 1,8 | 2 | |||||||||
| Max. Tension Operational, kN | 0,4 | 0,5 | 0,6 | |||||||||
| Crush resistance, N/10 cm | 3000 | |||||||||||
| Temperature operation, °C | -40 … +60 | |||||||||||
| Temperature installation, °C | -10 … +50 | |||||||||||
| Temperature storage, °C | -40 … +60 | |||||||||||
| Min. bending radius | 20 Ø cable | |||||||||||
Color coding
Default fiber color sequence
1RD
2GN
3BU
4YE
5WH
6GY
7BN
8VT
9TQ
10BK
11OG
12PK
Technical documentation
Viewed products
Do you have any questions?
Fill out the form and we will contact you shortly to clarify all issues.
