Optical cable А-DQ(ZN-AY)2Y xTyЕ 2,7kN
Construction number:
U27PxC1
For laying on roofs, facades, poles and other open areas where there is significant exposure to ultraviolet radiation.
UV resistant
Safe for installation near power lines, lightning protection and high-voltage equipment.
All-dielectric
For laying outdoors – on facades, poles, in the ground, outdoors.
Outdoor
For air laying on supports or between buildings.
Aerial
А-DQ(ZN-AY)2Y xTyЕ 2,7kN is an ADSS cable designed for distribution and trunk networks. It is suitable for aerial suspension between power line poles, buildings and other objects in spans up to 95 m (depending on climatic conditions), along building facades, cable channels. The number of fibers is from 4 to 144. Multi-tube construction with a central glass rod and a peripheral layer of strong aramid yarns, which ensures the maximum permissible tensile load of the cable up to 2.7 kN. The sheath is made of medium-density polyethylene (MDPE), which is resistant to UV radiation, moisture and mechanical stress. The optical tubes are filled with a gel that blocks moisture penetration, and there is a water-blocking tape between the tubes. The cable ensures reliable operation in difficult conditions, retains its geometry in the clamps, and its dielectric design prevents induction currents from occurring in the cable.
General information
Cable construction
- Optical fiber: Single-mode Rec. ITU-T G.652.D
- Filler: Thixotropic filling compound (gel)
- Dummy filler: Polyethylene (HDPE)
- Peripheral strength member: Aramid yarn
- Loose Tube: Polybutylene terephthalate (PBT)
- Central strength member: FRP rod
- FRP jacketing: Polyethylene (HDPE)
- Water blocking element: Water blocking yarn
- Fixing element: Polyester yarn
- Outer jacket: Polyethylene (MDPE), black, UV-resistance
- Ripcord: Polyester yarn
Advanced features
The table scrolls sideways
| Cable ID | U27P6C1 | U27P9C1 | U27PBC1 | U27PEC1 | U27PKC1 | U27PNC1 | U27PRC1 | U27PTC1 | U27PXC1 |
| Number of fibers | 8 | 12 | 16 | 24 | 36 | 48 | 72 | 96 | 144 |
| Construction | 2×4 | 3×4 | 4×4 | 2х12 | 3х12 | 4х12 | 6х12 | 8х12 | 12х12 |
| Optical fiber
Default Fiber Standard |
Single-mode Rec. ITU-T G.652.D | ||||||||
| Cladding Diameter (±0,7), µm | 125 | ||||||||
| Cladding Diameter (±5), µm | 242 | ||||||||
| Attenuation (λ= 1310 nm), dB/кm | ≤ 0,32 | ||||||||
| Attenuation (λ= 1550 nm), dB/кm | ≤ 0,22 | ||||||||
| Number of elements | 6 | 8 | 12 | ||||||
| Number of fillers | 4 | 3 | 2 | 4 | 3 | 2 | 0 | ||
| Loose Tube diameter (±0,2), mm | 2,0 | ||||||||
| Cable diameter (±0,6), mm | 9,0 | 10,4 | 12,8 | ||||||
| Outer sheath thickness (±0,2), mm | 1,5 | ||||||||
| Cable weight (±5%), kg/km | 62 | 63 | 64 | 66 | 86 | 128 | |||
| Max. Tension Installation , kN | 2,7 | ||||||||
| Max. Tension Operational, kN | 1,2 | 1,5 | 1,8 | ||||||
| Crush resistance, N/10 cm | 2500 | ||||||||
| Delivery Lengths (±100) , m | 2000 / 4000 * | ||||||||
| Temperature operation, °C | -40 … +70 | ||||||||
| Temperature installation, °C | -10 … +50 | ||||||||
| Temperature storage, °C | -40 … +70 | ||||||||
| Min. bending radius | 20 Ø cable | ||||||||
Color coding
Default fiber color sequence
1RD
2GN
3BU
4YE
5WH
6GY
7BN
8VT
9TQ
10BK
11OG
12PK
Technical documentation
Calculate the cable according to your conditions
Or, you can call us right away.
1
2
This field is required.
Select climate conditions by NESC
Multifunctional cables for both indoor and outdoor installation. One cable, many solutions.
Viewed products
Do you have any questions?
Fill out the form and we will contact you shortly to clarify all issues.
