Optical cable A/J-(ZN-AY)H xЕ 0.3/0.8kN G.657A2
For laying on roofs, facades, poles and other open areas where there is significant exposure to ultraviolet radiation.
UV resistant
For use in premises, tunnels, public facilities and service areas with increased fire safety requirements.
LSZH sheath
For laying inside buildings, connecting subscribers, in server rooms, low-current shafts, cable ducts and internal routes.
Indoor
Safe for installation near power lines, lightning protection and high-voltage equipment.
All-dielectric
For laying outdoors – on facades, poles, in the ground, outdoors.
Outdoor
For air laying on supports or between buildings.
Aerial
General information
Cable construction
- Optical fiber: Single-mode Rec. ITU-T G.657.A2
- Peripheral strength member: Aramid yarn
- Outer jacket: Thermoplastic LSZH, UV resistance
Advanced features
| Cable ID | A08F1K | A08F2K | A08F3K |
| Number of optical fibers | 1 | 2 | 4 |
| Optical fiber
Default Fiber Standard |
Single-mode Rec. ITU-T G.657.A2 | ||
| Cladding Diameter (±0,7), µm | 125 | ||
| Cladding Diameter (±5), µm | 242 | ||
| Attenuation (λ= 1310 nm), dB/кm | ≤ 0,4 | ||
| Attenuation (λ= 1550 nm), dB/кm | ≤ 0,3 | ||
| Cable diameter (±0,2), mm | 3 | ||
| Cable weight (±5%), kg/km | 9 | ||
| Max. Tension Installation , kN | 0,8 | ||
| Max. Tension Operational, kN | 0,3 | ||
| Crush resistance, N/10 cm | 2500 | ||
| Temperature operation, °C | -35 … +70 | ||
| Temperature installation, °C | -10 … +50 | ||
| Temperature storage, °C | -35 … +70 | ||
| Min. bending radius | 7 Ø cable | ||
Default fiber color sequence
Technical documentation
Calculate the cable according to your conditions
Or, you can call us right away.
Select climate conditions by NESC
Multifunctional cables for both indoor and outdoor installation. One cable, many solutions.
Viewed products
Do you have any questions?
Fill out the form and we will contact you shortly to clarify all issues.
