Optical cable Micro А-DQ(ZN)2Y xTyЕ 1.0kN (t1.35)
Construction number:
B10PxP1
For laying on roofs, facades, poles and other open areas where there is significant exposure to ultraviolet radiation.
UV resistant
Safe for installation near power lines, lightning protection and high-voltage equipment.
All-dielectric
For laying by pneumatic blowing into microducts or cable ducts.
Blowing installation
For laying outdoors – on facades, poles, in the ground, outdoors.
Outdoor
Micro A-DQ(ZN)2Y xTyE is an optical cable on microtubes for laying using micro-duct blowing technology. The advantage of the design is the thinnest optical micromodules with a diameter of 1.35 mm for maximum fiber density and cables in the cable duct. But with the use of standard 250 micron fiber, which reduces the cost of the cable compared to the 180-200µm versions of optical fibers.
The family of cables
General information
Cable construction
- Optical fiber: Single-mode Rec. ITU-T G.652.D
- Filler: Thixotropic filling compound (gel)
- Dummy filler: Polyethylene (HDPE)
- Loose Tube: Polybutylene terephthalate (PBT)
- Central strength member: FRP rod
- FRP jacketing: Polyethylene (HDPE)
- Water blocking element: Water blocking yarn
- Fixing element: Aramid yarn
- Ripcord: Polyester yarn
- Outer jacket: Polyethylene (HDPE), black, UV-resistance
Advanced features
The table scrolls sideways
| Cable ID | B10P7P1 | B10P8P1 | B10PEP1 | B10PNP1 | B10PRP1 | B10PTP1 | B10PXP1 |
| Optical fiber | 12 | 12 | 24 | 48 | 72 | 96 | 144 |
| Construction | 1х12 | 2х6 | 2х12 | 4х12 | 6х12 | 8х12 | 12х12 |
| Optical fiber
Default Fiber Standard |
Single-mode Rec. ITU-T G.652.D | ||||||
| Cladding Diameter (±0,7), µm | 125 | ||||||
| Coating Diameter (±5), µm | 242 | ||||||
| Attenuation (λ= 1310 nm), dB/кm | ≤ 0,32 | ||||||
| Attenuation (λ= 1550 nm), dB/кm | ≤ 0,22 | ||||||
| Number of elements | 6 | 8 | 12 | ||||
| Loose Tube diameter (±0,2), mm | 1,35 | ||||||
| Number of fillers | 5 | 4 | 4 | 2 | 0 | ||
| Cable diameter (±0,4), mm | 5,2 | 6,0 | 7,6 | ||||
| Cable weight (±5%), kg/km | 22 | 24 | 25 | 33 | 52 | ||
| Max. Tension Installation , kN | 0,6 | 0,8 | 1,2 | 1,5 | |||
| Crush resistance, N/10 cm | 500 | ||||||
| Temperature operation, °C | -40 … +60 | ||||||
| Temperature installation, °C | -10 … +50 | ||||||
| Temperature storage, °C | -40 … +60 | ||||||
| Min. bending radius | 20 Ø cable | ||||||
Color coding
Default fiber color sequence
1RD
2GN
3BU
4YE
5WH
6GY
7BN
8VT
9TQ
10BK
11OG
12PK
Technical documentation
Viewed products
Do you have any questions?
Fill out the form and we will contact you shortly to clarify all issues.
